Dr. Li Chuang

Professor
Xi'an Institute of Optics and Precision Mechanics (XIOPM) of Chinese Academy of Sciences (CAS)
NO.17 Xinxi Road, Xi'an, Shaanxi, China, 710119
Email: lichuang@opt.ac.cn

Research Field:
Electro-optical Imaging and Simulation.
Telescope Opto-mechanical System.

Biography:
Professor, Optical engineering
Xi’an institute of optics and precision mechanics, Chinese academy of sciences, China (2011)

Associate Professor, Optical engineering
Xi’an institute of optics and precision mechanics, Chinese academy of sciences, China (2005)

PhD, Mechanical Eng., Mechanical manufacturing and Automation
Xi’an Jiaotong University, China (2005)

MS, Mechanical Eng., Mechatronic Engineering
Northwestern Polytechnical University, China (1999)

BS, Mechanical Eng., Mechanical design and manufacturing
Northwestern Polytechnical University, China (1992)

Representative Publications:
Papers
1. Ren G, Li C, Wang W, et al. Structural Design of Carbon Fiber-reinforced Plastics Barrel for Space Remote Sensing Camera. Guangzi Xuebao/Acta Photonica Sinica, 2019, V48.
2. Ren G, Li C, Pang Z, et al. Design and test of a flexure mount for lightweight mirror. SPIE, 2019, V10837.
3. Xiang M, Li C, Zhao Y, et al. Review on the new technologies to improve the resolution of spatial optical remote sensor. SPIE, 2019, V10837.
4. Zhao H, Xie X, Xu L, et al. Performance comparison between two kinds of variable curvature mirrors: Mathematical analysis, prototype design, experimental demonstration, and application potentials in realizing non-moving element optical zooming. SPIE, 2019, V10837.
5. Xia S, Shi J, Ren G, et al. Calibration Mechanism Design and Stiffness Analysis. IOP Conference Series: Materials Science and Engineering, 2019, V520.
6. Zhang H, Li C, Duan Y. Modified slanted-edge method to measure the modulation transfer function of camera. Optik-International Journal for Light and Electron Optics, 2018, V157, 635-643.
7. Chong Y, Li C, Xia S, et al. A calibration mechanism based on worm drive for space telescope. SPIE, 2017, V10339.
8. Lei W, Li C, Zhong P, et al. Realization and testing of a deployable space telescope based on tape springs. SPIE, 2017, V10339.
9. Zong C, Zhao H, Xie X, Li C. Robust multiframe images super resolution. SPIE, 2017, V10462.
10. Jing N, Li C, Chong Y. Estimation of position and velocity for a low dynamic vehicle in near space using nonresolved photometric and astrometric data. Applied optics, 2017, V56, 671-681.
11. Jing N, Li C, Zhong P. Ground-based optical detection of low-dynamic vehicles in near-space. Optical Engineering, 2017, V56, 014107.
12. Jing N, Li C, Zhong P, et al. Inversion of low dynamic vehicle shape and dimension information using non-resolved photometric data in near space. Optics and Precision Engineering, 2017, V25, 1738-1747.
13. Jing N, Li Chuang, Pan Y, Zhong P. Analysis of Ground-based Detection Ability of High Altitude Balloon in Near Space. Acta Photonica Sinica, 2016, V45.
14. Zhong P, Li C, Jing N, et al. Research on lightweight passive deployment mechanism for the secondary mirror in the deployable space telescope. SPIE, 2016, V9685.
15. Xie X, Zhao H, Li C, et al. Annular force based on variable curvature mirror technique. Acta Photonica Sinica, 2016, V45.
16. Zhao C, Li C, Zhou N, et al. Self-deployable structure designed for space telescope for microsatellite application. SPIE, 2016, V9685.
17. Yang W, Fan X, Wang C, et al. Design and verification of focal plane assembly thermal control system of one space-based astronomy telescope. SPIE, 2015, V9678.
18. Zhao H, Xie X, Wei J, et al. Annular force based variable curvature mirror aiming to realize non-moving element optical zooming. SPIE, 2015, V9678.
19. Jing N, Li C, Zhou N. Research on optical scattering characteristics of high altitude balloon in near space. Acta Optica Sinica, 2015, V35.
20. Zhou N, Li C, Gao W, et al. A secondary mirror adjustment system with hexapod structure for optical telescope application. SPIE, 2014, V9280.
21. Zhao C, Li C, Zhou N. A deployable telescope imaging system with coilable tensegrity structure for microsatellite application. SPIE, 2013, V8908.
22. Lu X, Li C, Fan X. Calculation of signal-to-noise ratio (SNR) of infrared detection system based on MODTRAN model. SPIE, 2013, V8907.
23. Li C, Ren G, Wang W, Fan X. Design of precision strut assembly made from carbon fiber composite. Optics and Precision Engineering, 2012, V20, 328-336.
24. Feng X, Li C, Zhao C. New measurement of the alignment of the deployable telescope. SPIE, 2012, V8417.
25. Yang W, Wang Y, Feng L, et al. Thermal management for CCD performance of one space telescope. SPIE, 2012, V8420.
26. Li C, Ren G, Wang W, et al. A precision carbon fiber hexapod for the installation of an optical telescope. Mechanic Automation and Control Engineering (MACE), 2011, 977-980.
27. Li C, Feng X. Deployment precision measurement modeling of a deployable space telescope based on tape springs. SPIE, 2011, V8321.
28. Ren G, Li C, Wang W, et al. Strain measurement aided assembly for a CFRP hexapod. SPIE, 2011, V8321.
29. Feng X, Li C, Ren G. Medium-sized aperture deployable telescope for microsatellite application. SPIE, 2011, V8196.
30. Zhang K, Fan X, Li C, et al. Design and wavefront sensing for the segmented spherical primary optical telescope. Proceedings of 2011 International Conference on Electronic and Mechanical Engineering and Information Technology, 2011, V7, 3828-3831.
31. Li C, Chen T. Simulation and optimization of chaotic micromixer using lattice Boltzmann method. Sensors and Actuators B: Chemical, 2005, V106, 871-877.